Home Theater Forum
Home Theater Forum
chat with other Aperion owners and our gurus

This topic has 2 voices, contains 1 reply, and was last updated by avatar Jason Hicks 1752 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
June 28, 2009 at 3:33 am #88
avatar

Hey guys.  I was dusting off my speakers and was cleaning around the sub cone on my 633T's.  I put the dust cloth a tad bit inside the sub cone to remove some dust when I felt kinda like a ridge inside the sub cone.  It almost feels like the sub cone is cracked on the inside.

 Is there supposed to be a ridge inside the sub cone?  If not I am going to think about getting the replaced with the warranty.

 Thanks for the help

 :o) 

June 29, 2009 at 10:38 am #1204
avatar
Jason Hicks

Hmmm, no the cone should be smooth, there's often a little ridge where the cone meets the dust cap in the center of the driver so maybe that's what you are feeling?

I can tell you that the carbon fiber weave that the drivers are made out of is pretty strong and I've never heard of a cone cracking before, but I suppose there's a first time for everything.

If there isn't any buzzing or distortion from the speaker and it's performing normally then I personally wouldn't worry about it.  But if you think that it requires repair feel free to give us a call at 888-880-8992 or shoot us an email at customerservice@aperionaudio.  Thanks!
 

Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.