Home Forums Aperion Forums Guru’s Joint In wall "small" or "large" speaker setting.

This topic contains 1 reply, has 2 voices, and was last updated by  Jason Hicks 6 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #2495

    I just read on the Aperion University in-wall buying guide that in-wall speakers should be set to the "small speaker" setting on the receiver.  Does this advice still hold for the larger 6-LCR speakers from Aperion?  Thanks!


    Jason Hicks

    Hello Caleb,

    Yes I would set the 6LCRs to small as well but you can drop the crossover to 70 or 60 Hz if you like.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.