Home Theater Forum
Home Theater Forum
chat with other Aperion owners and our gurus

This topic has 2 voices, contains 2 replies, and was last updated by avatar Gregory 1550 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
January 18, 2010 at 9:27 am #2500
avatar

When I was installing banana plugs into my cables I wasn't able to strip it without cut a few wire. I used I wire cutter but the shape of the speaker cable was kind of uneven, so after some unsucessful redos I gave up and accepted some losses.

Do you think this could compromise the quality of my installation?

Thanks 

January 18, 2010 at 10:09 am #2724
avatar
Gregory

Losing a few strands of copper wire isn't a big deal in the grand scheme of things.  If you plug them in and they sound fine, you're good to go!

 

Just make sure there aren't any stray wires sticking out of the banana plug, as that could potentially cause a short.

 

 

January 18, 2010 at 11:23 am #2585
avatar

Thanks PJ! That's what I thought.

About the possible stray wires sticking out of the banana plug, I'm pretty sure that's not the case, since It's my first real sound system I tried to make this as perfect as I could, I think the only thing that I could do it better is not to cut this few wires. 

The only thing is that when I plugged everything they didn't sound fine, they sound awesome!!!! 

Viewing 3 posts - 1 through 3 (of 3 total)
You must be logged in to reply to this topic.