Home Forums Speaker Forum Getting Your System Connected tv riser stand for Verus Grand Center

This topic contains 1 reply, has 2 voices, and was last updated by  Jason Hicks 3 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #3847


    **Feel free to direct me to an appropriate thread topic if one already exists.**

    Anyhow, I’ve been enjoying my VG Center for over a year now. But I haven’t yet actually physically integrated it into my system. When using my projector, it sits fine on my TV shelf . . . in front of my plasma screen. So I unceremoniously move it to the floor when I use the latter system.

    Any suggestions for a good TV riser that could fit on top of the VGC? I’ve looked online and haven’t found one with the required clearance.


    Jason Hicks

    Hello David,

    Sorry for the delay in our response. I also have not seen a whole lot of great options for a TV riser to be used with the VGC either when I have looked in the past. Personally if it were me I’d probably just build a simple box to but the TV stand on top of and then the VGC could sit in front of it. My carpentry skills are pretty rudimentary but I think I could pull off a basic riser to get the TV the nine inches or so above the speaker that would be necessary.

    If you don’t think that’s a possibility I have found this stand:


    It’s not the most elegant solution since it is designed for a soundbar, but it is high enough and the VGC could just sit in front of it and it would provide enough clearance to ensure that the TV is not blocked.

    Sorry I don’t have a better solution but please let me know if you have any other questions, thanks!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.