I am wiring my Powered Towers and VAC Center with Monster Cable MCX1S 10' cables, and I am using a 30' spool of Monster XP for each of the bookshelf surrounds (terminated with banana's).

What are you using? 

Rear pair L/R surround bookshelfs in 50' lengths and L/R front bookshelf pair & VAC center channel in 15' lengths of Acoustic Research PRO II 12 Gauge wire. http://www.accessories4less.com/Amazing/itemdesc.asp?CartId=5708762FQM-EVEREST-PW920&ic=PR%2D222&cc=&tpc=

*Using pins that were included for now, but will be upgrading to banana plugs within the next week or so.

 

 

Currenly I'm running Monster XPHP-CI100 12 Gauge speaker wire to all my speakers including the (2) towers - 30ft (total) , (1) Vertical Array center 15ft (total), and (4) bookshelf speakers - two runs of 30ft and two runs of 22ft.  I terminated the ends of the lines at both ends with Monster self-crimping banana connectors QL GMT-H which work wonderfully I might add.  For my subwoofer I am running a Monster Cable MB400 18 ft. mono cable. 

I use Rat Shack 12 gauge all around, 15 ft to fronts and center, 30 ft to the surrounds, all terminated with banana plugs.

With so many companies out there the world of "wiring" is a jungle of information.  I finally settled on Cobalt Cables for the entire system.  Interesting enough, they have a link to Aperion Audio!

I am using MonsterCable Z1 that I have been using for a few years. 

http://www.monstercable.com/productPage.asp?pin=37

Cobalt is also a great choice Thomas.  They are an excellent value and we send many people their way.  They have a reputation for value and great customer service also.

http://www.cobaltcable.com/

Has anyone compared Cobalt Cable to Signal Cable?  I've used Signal Cable in the past with great results.  I am actually using Signal for all of my interconnects in the HT currently.  I am hoping to upgrade my MC speaker wire to Signal in the future, but would be curious of people's opinions on the Cobalt Cables.

I am also considering upgrading the power cords on my PT's to either Signals or PS Audio Power Punch's.  Has anyone experiemented with upgraded power cords with their PT's?

I've got my Aperion sub receiving signal through an Audio Quest G-Snake sub cable.

My main speakers are wired with Liberty Cable wiring. It was cheaper and nicer than any other speaker wire I had seen. The wire is connected with Monster Cable banana plugs.