I'll take a shot at it.  I do not have an 806.

Set your fronts a small.

Set subwoofer to true.

Set sub crossover to 80.

Leave fronts at default level.

Set sub level in AVR to same as front default 

Set center to front defaults +2

I can't help you on the IW, just use your ears

On the sub set the crossover to bypass

On the sub set the level to -9 as a start and adjust to taste

 

Cheers 

---

Russ

Joined you!

I would set the fronts to large - the 4T can reproduce sound down to around 45 Hz and setting the fronts to small will set the crossover cutoff at 80Hz.  Setting them to large will send the full range to the 4T.

Set the crossovers on the IWs to 80 Hz.  Same with the 4C center.

As for the levels, your best bet is to do a manual calibration with an SPL meter.  Since you have a 5.1 system from us, you should have received one with your care kit.  Use that to set the levels to balance the system.  We definitely recommend a manual calibration over an automatic.

Enjoy your new system!

---

Mark
Aperion Audio Guru

I have an 876, and I don't believe you set anything to "small" or "large."  You only set the crossover setting.  So, you can set the 4T's to 50hz or whatever, and still have the sub pick up at 80hz.

 

 

PJ:

I have an 876, and I don't believe you set anything to "small" or "large."  You only set the crossover setting.  So, you can set the 4T's to 50hz or whatever, and still have the sub pick up at 80hz.

 

 

I just have an older Onkyo but I think I have heard on the newer ones it's called fullband for large.

 

Cheers 

---

Russ

Joined you!

blkhks:

I would set the fronts to large - the 4T can reproduce sound down to around 45 Hz and setting the fronts to small will set the crossover cutoff at 80Hz.  Setting them to large will send the full range to the 4T.

Set the crossovers on the IWs to 80 Hz.  Same with the 4C center.

As for the levels, your best bet is to do a manual calibration with an SPL meter.  Since you have a 5.1 system from us, you should have received one with your care kit.  Use that to set the levels to balance the system.  We definitely recommend a manual calibration over an automatic.

Enjoy your new system!

The 4T do go surprizingly low and I experimented quite a bit with them but in my 2.1 (4Ts and 8D) case the system sounds best with the 4Ts set small and crossed over at 80Hz.  Another benefit is that the sub is always on all the time the AVR is and only shuts off 15 or so minutes after the AVR is shut down.  Of course the spl meter can be quite helpful, I have just never gotten around to getting one.

Cheers 

---

Russ

Joined you!

Indeed, the SPL meter becomes very helpful with a surround set up, but it's not really necessary with 2.0 or 2.1. Sounds like you've got your system dialed in perfect

---

Oliver Amnuayphol
Home Theater/Audio Guru
Aperion Audio