http://www.aperionaudio.com/community/forums/19/ShowForum.aspxMP3, Ipods, Digital Music, Remote Controls, etc...enCommunityServer 2.1 (Build: 60809.935)http://www.aperionaudio.com/community/forums/thread/9113.aspxFri, 19 Dec 2008 23:49:59 GMTf11d5be7-a0b3-4f29-a1ce-c4505b0f0ce4:9113joetag0http://www.aperionaudio.com/community/forums/thread/9113.aspxhttp://www.aperionaudio.com/community/forums/commentrss.aspx?SectionID=19&PostID=9113<p>Jason, </p><p>Do you mean the plastic U channel that you mount above or on a baseboard or wherever? I&#39;ve used those before and they did have adhesive on them so you didn&#39;t have use screws or brads to attach them to the wall.&nbsp; They worked very well and were easy to cut. I cut 45 degree angles at the corners for that professional look :-).&nbsp; A word of advice, either put the cable/wire or string in the channel before you mount them to make installation easier.&nbsp; I&quot;ve seen them in different sizes to accomodate larger cables like Ethernet cables.&nbsp; I&quot;ve also had to remove them - they came off very easily but they did take some paint with them.</p><p>Another alternative are flat wires that you mount on a wall/ceiling. They also use adhesive.&nbsp; They&#39;re very flat and they&#39;re also very expensive.&nbsp; After you run those you need to use drywall compound to blend the edges into your wall/ceiling and repaint.&nbsp; I looked into those for my current house (cathedral ceilings that are hard to get at from above) but I went with wireless instead and saved a fortune!</p>http://www.aperionaudio.com/community/forums/thread/9104.aspxFri, 19 Dec 2008 20:44:24 GMTf11d5be7-a0b3-4f29-a1ce-c4505b0f0ce4:9104Jason0http://www.aperionaudio.com/community/forums/thread/9104.aspxhttp://www.aperionaudio.com/community/forums/commentrss.aspx?SectionID=19&PostID=9104Has anybody had any experience using cable runners to hide cables along the walls/molding? If so what kinds did you use? I&#39;ve only found stuff with sticky adhesive which sounds a bit strange.