Handsomely constructed with the audiophile in mind, these stands raise the Aperion Audio 5B or 532-LR loudspeakers to new heights for both sound, and the look of your room.

 

Great stands!

Name:	Stephen
Rating:	5
Date:	Wednesday, February 04, 2009
Comments:	I just got my stands in yesterday, and I have to say, these things are great. I was surprised at how heavy the base plate is. Easy to assemble, and my 5B's look fantastic on them. I rocked them back and forth to see how steady they were, and realized I don't need to worry about knocking them over! At first, I was worried that they wouldn't be high enough to be used for my surround speakers, but they seem to be just the right height. I wouldn't hesitate to buy these again!

---

All the other reviews nailed it

Name:	Gregory
Rating:	5
Date:	Wednesday, February 04, 2009
Comments:	Tough to add to what has already been said. High-quality construction, sturdy as all get-out, and made perfectly for my 5Bs. The cable management was a little bit of a pain, particularly if you have big fingers, but that's a pretty nit-picky thing for an otherwise great product. If you're picking up a pair of 5Bs, get these stands. Particularly at this price point, you'd be unlikely to find a better option.

---

Perfect stand

Name:	Pat Cayton
Rating:	5
Date:	Friday, December 26, 2008
Comments:	Just received my two stands and they are better then I was expecting. Very well made and heavy. One bit of advice is to put your speaker wire through the stand before you build the stand. I used some needle nose pliers to get the wire out the top hole. After doing this it took me 3 minutes to put the stand together. Could not be any happier with this product.

---

5.1 Intimus system

Name:	Trevor Feist
Rating:	5
Date:	Monday, April 28, 2008
Comments:	I ordered 4 of these stands when I purchased the new Intimus Harmony system. I mounted my 5B's onto the top. The stands go together well, they are pretty heavy and have nice soft feet for my hardwood floors. It does take some time to adjust the speaker and stand so that the speaker wire holes are in the back and the speaker is facing the right way. All in all exactly what I expected and much better than having the rear speaker sitting on end tables. They tuck nicely away behind the couch and table...no problem

---

Decent Speaker Stands.

Name:	Mark Kocik
Rating:	4
Date:	Monday, February 04, 2008
Comments:	I picked up two of these stands to use with the 532-LR bookshelf speakers, which are being used for rear surrounds. They look great and were simple to assemble. You can also fill the column with shot or sand for extra weight, but you cannot run your speaker wire in the column if you do so. My biggest complaint with them is that is is difficult to thread the speaker on the top of the stand while ensuring it faces the right direction once it tightens. They tend to wobble a bit to, but this is a result of the carpet I am on as all of my speakers are a bit wobbly, even with floor spikes. In all, these are great, inexpensive stands that work well with the 535-LR.

No Professional Reviews have been submitted yet.

Cable Incognito

Each stand comes standard with a cable management tube that is ported on top and bottom. The cable is neatly hidden so the look of your room is preserved.

Footsies For No Resonating Floors

Each stand comes with floor spikes for carpet and small footers for hard floors. Using the spikes helps minimize uninvited floor vibrations.

Dimensions:	Top plate: 6" x 6", Bottom Plate: 10" x 12", Height: 29" (with floor spikes)
Weight:	21 lbs [Pair], 12 lbs [Single]
Color/finish:	Matte Black
What’s in the box:
Owner’s manual All mounting hardware 4 Floor Spikes 4 Footers 8 Footer Pads 8 Speaker Pads

Name your configuration: front left/right, front center, surround left/right, back left/right and back center. The I29 stands gladly accommodate any configuration of Aperion’s 5B & 532-LR speakers.

Installation is no more complicated than common sense.  Position each stand one foot from any sound obstruction. This could be a wall, a corner or a piece of furniture. Set each 5B or 532-LR speaker on its stand. Place the enclosed rubber pads underneath the speakers to stabilize and absorb vibrations. Then select a track and sit back in awe. 

Some hands-on assembly of the stands themselves is required, but all you need is a Philips screwdriver and the sheer excitement of putting your room together.