Got a small room and a small budget? The Bravus 8A packs the same acoustic and build quality of our Bravus line into a subwoofer that sounds fantastic at a great price. An 8" aluminum cone driver and 100 watts of power will give your movies and music that visceral punch that only great home theater can deliver.
Single 8” High-Excursion Custom Aluminum Driver
We designed Bravus with custom aluminum drivers for efficient high-performance. One part rigid precision, one part low bass extension - shake well with a healthy helping of linearity, and you're left with a single active driver that will take your music and movies to new depths. Aluminum offers the perfect blend of strength and mass to keep the amp operating efficiently. Couple this with a heavy duty rubber surround and a precision motor structure and you get bass that is deep and linear.
100 Watt Amplifier
Great bass needs great amplification. The Bravus 8A is backed by a 100 watt class A/B amplifier that is more than enough to fill your room with tight, clean bass.
Customizable Crossover from 40Hz-160Hz
Tailor your Bravus subwoofer to your tastes. Every room is different, and every person is unique - your subwoofer should follow suit. Or if you prefer, bypass the internal crossover entirely and control the bass with your receiver or pre-amp. The choice is yours
Detachable Power Cord with Switchable Voltage
We make it easy to upgrade your cord or take your subwoofer on the road. No matter if you're in Los Angeles or Lisbon, you can easily switch between 110V and 220V power. Just plug in the correct cord, switch the voltage and enjoy. One caveat, though -- We're not responsible for international noise ordinances, so tread carefully and bring bribe money.
Line Level Inputs
Every Aperion subwoofer comes standard with an LFE line level input that connects to any receiver’s subwoofer pre-out. Or, if you don't have a sub-out connection, use the left and right low level inputs with the low level outputs from your pre-amp or receiver.
High Level Inputs
Hook your new subwoofer up to any receiver or amplifier! If you don’t have a sub-out connection on your receiver, you can use the left and right speaker outputs to make setup a snap.
Small Internally Braced ¾” HDF Ported Enclosure
Powerful bass needs a sturdy cabinet. Every Bravus 8A subwoofer is built out of strong ¾” HDF and internally braced to reduce cabinet vibration.
Timeless Design and Furniture-Grade Finish
Each of our Bravus subwoofers features a timeless design aesthetic and is beautifully finished in either real cherry wood or high gloss piano black lacquer, allowing them to effortlessly blend into your decor. This first-rate cabinetry unites the acoustic qualities of only the most expensive subwoofers with a furniture-grade finish so handsome your coffee table will be jealous.
Leveling Floor Spikes and Footers
Included with each Bravus subwoofer is a set of metal floor spikes with footers and a set of rubber feet. Use the metal spikes on carpet for tighter bass by decoupling the sub from the floor. If you have hard floors, use the footers with your metal spikes or use the included rubber feet to improve bass response and protect your surfaces from scratches or dents.
|Frequency Response||(+/-3dB) 36Hz - 160Hz|
|Amplifier Power||100W RMS|
|Woofer||Single 8" Aluminum Cone Driver|
|Driver Configuration||Single Active Downfire|
|Enclosure Type||Ported and Internally Braced 3/4" HDF|
|Dimensions||15"H x 13.5" W x 13.5" D (with feet attached)|