So how can lows give you a true high? By pumping out bass with quick reflexes and thundering power. We got to third base with our drivers—a single active down-firing 10-inch driver and double 10-inch side-firing passive radiators on the sides—then pushed up the power to 500 watts. Home run! Muscular, defined bass that gives your movies and music even more gut-wrenching impact.
All that plus a timeless design that seamlessly integrates with your décor.
Bravus by Aperion – subwoofers designed from the ground up for maximum performance, sonic quality and value.
|Frequency Response||(+/- 3dB) 28Hz - 350Hz -- (+/- 6dB) 26Hz - 350Hz|
|Amplifier Power||500W RMS|
|Woofer||10", High-excursion Aluminum Driver with Dual 10” Passive Radiators|
|Driver Configuration||Single Active & Dual Passive|
|Enclosure Type||Sealed and Internally Braced 1" HDF|
|Dimensions||15"H x 13.5" W x 13.5" D (with feet attached)|
Single Active & Dual 10" Passive High-Excursion Custom Aluminum Drivers
We designed Bravus with dual custom aluminum drivers for efficient high-performance. One part rigid precision, one part low bass extension - shake well with a healthy helping of linearity, and you're left with three drivers to take your music and movies to new depths. Aluminum offers the perfect blend of strength and mass to keep the class D digital amp operating efficiently. Couple this with a heavy duty rubber surround and a precision motor structure and you get bass that is deep and linear. To make things even better, we packed three drivers in a small gorgeous enclosure so your Bravus 10" sub offers the performance of a larger sub but takes up less space.
500 Watt Digital Power Amplifier
All of the Bravus II subwoofers use an efficient high power class D amplifier with a high current switching power supply. This allows maximum performance output and deep bass authority while maintaining the musical accuracy and detail you expect from Aperion Audio.
Detachable Power Cord w/ Switchable Voltage
We make it easy to upgrade your cord or take your subwoofer on the road. No matter if you're in Los Angeles or Lisbon, you can easily switch between 110V and 220V power. Just plug in the correct cord, switch the voltage and enjoy. One caveat, though -- We're not responsible for international noise ordinances, so tread carefully and bring bribe money.
Line Level Inputs
Every Aperion subwoofer comes standard with an LFE line level input that connects to any receiver’s subwoofer pre-out. Or, if you don't have a sub-out connection, use the left and right low level inputs with the low level outputs from your pre-amp or receiver.
High Level Inputs
Hook your new subwoofer up to any receiver or amplifier! If you don’t have a sub-out connection on your receiver, you can use the left and right speaker outputs to make setup a snap.
Small Internally Braced 1" HDF Sealed Enclosure
Powerful bass needs a sturdy cabinet. Every Bravus II 10D subwoofer is built out of strong 1" HDF and internally braced to reduce cabinet vibration to nearly nothing.
Leveling Floor Spikes and Footers
Included with each Bravus subwoofer is a set of metal floor spikes with footers and a set of rubber feet. Use the metal spikes on carpet for tighter bass by decoupling the sub from the floor. If you have hard floors, use the footers with your metal spikes or use the included rubber feet to improve bass response and protect your surfaces from scratches or dents.
Acoustically Transparent Grille
Nothing stands between you and your sound. We designed a sonically invisible grille that not only looks great, but also protects your precious woofers from curious fingers, claws or snouts.